Today, 05:59 AM
[center]
[/center]
[center]CLICK FOR BEST SEX DOLL FEET GUIDE NOW[/center]
Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Few customers think about standing feet beforehand, yet the difference, once they need them, is massive. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Comprehend the difference before ordering and you'll have stayed away from an irritating purchase in one of the simplest ways possible.
The Bolts Are the Key
The basic difference couldn't be simpler. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Because non-standing feet don't have these bolts, the doll can only sit or lie down; trying to stand her damages the feet. It all hinges on the bolts, with everything else following from whether they're present or not.
The Photographer's Choice
Standing feet are a must for photography and display. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without noticeable supports. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the principal reason most photographers specify standing feet when ordering.
Showering and Standing Feet
Showering is another case where standing feet are important. A shower with your doll only works if she can stand, as lying her down in one is both impractical and unsafe. Unlike non-standing feet, standing feet don't absorb water thanks to the metal bolts, and they give her stability in a wet environment. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a genuine safety consideration.
No Precaution Is Enough
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. When it gets wet, the foam or filler material inside the ankle of non-standing feet absorbs water. After that, water rusts the metal skeleton inside the leg; you won't see it for weeks or months, and it's fundamentally unfixable once it starts. No matter how diligent you are, a doll with non-standing feet should never be in the shower; water finds its way in anyway of precautions.
Display Rather Than Hide
In some setups, standing feet also make storage easier. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. It's a space-efficient alternative for buyers without room for a hanging setup, and a good one for buyers who'd rather display the doll than keep her hidden. Storing the doll in a way that's apparent and accessible is possible with standing feet, and some purchasers prefer that.
What Standing Feet Cost
The disadvantage of standing feet is that they're slightly more pricey and somewhat heavier. Metal bolts add a small quantity of weight to the doll. Manufacturing is also more involved. The upshot is a price that's ordinarily a few percent higher than a doll with non-standing feet. It's worth knowing about if you're acquiring on an incredibly tight budget, though the difference is small and typically worth the extra cost.
Not a Reason to Avoid Standing Feet
The bolts can show if the feet are bare, which is the other drawback. High-heeled shoes or open-toed footwear on a doll can leave the bolts noticeable in photos, which some buyers find distracting. This is a minor aesthetic issue, and it can be solved by covering the feet with closed shoes or by opting for footwear that hides the bolts, so it's not a reason to stay away from standing feet completely.
Putting the Savings Elsewhere
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Most of her life in a bed or on a sofa means non-standing feet will be perfectly adequate, and you can put the savings into other upgrades like articulated hands or a better wig. This choice is entirely valid for purchasers who know what they want.
Softer, More Flexible Feet
Non-standing feet are somewhat softer and more flexible too, and some buyers find that more comfortable to touch. A subtle difference, not usually enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.
Remember They're Non-Standing
The large risk with non-standing feet is that buyers forget what kind of feet they have and try to stand the doll in any case. This common slip-up causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.
Decide Before You Order
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. Short answer: no, not easily. Expensive, and often not as solid as the original, is the process of adding the bolts later by cutting into the feet and installing new hardware, since they're embedded in the soles during manufacturing. It's better to buy a doll with standing feet in the first place than to try to add them later if you're considering purchasing a doll without standing feet and think you might want them later.
Picking Between Standing and Non-Standing Feet
Customers opting for between standing and non-standing feet can follow some simple functional advice. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet are perfectly acceptable if you only want to use her in bed or on a sofa and you don't care about display. Undecided purchasers are safer with standing feet, which restrict nothing and justify their small extra cost.
Male Dolls Benefit More From Standing Feet
A gender consideration deserves a mention as well. Broadly, standing feet advantage male dolls more than female dolls, because male dolls are heavier and more difficult to store in any other way. A 45kg male doll who can't stand must be stored lying down, putting pressure on the body and requiring more space. Standing feet give male dolls the ability to store upright, which is a real benefit for purchasers who don't have a lot of room.
The Aesthetic Difference
One final note: the aesthetic difference between standing and non-standing feet. On standing feet the bottom is a little harder thanks to the bolts, and that can show when the doll is barefoot. Less aesthetically pleasing, to some buyers, is this, particularly on dolls with delicate features, as the hard soles look slightly industrial. The softer and more natural look of non-standing feet is what some customers prefer. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.
Maintenance: Check the Bolts Periodically
There's also a maintenance angle that's worth considering. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out totally can make the doll collapse. Tighten the bolts with the appropriate tool if they feel loose when you check them every few months by gently twisting. Somewhat lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.
Stability Depends on the Surface
How the doll stands on different surfaces is also influenced by the bolts. On carpet, the bolts grip well and the doll is constant. If the floor is hard, and especially smooth, the bolts can slip and the doll may need additional support to stay upright. Sliding on a hard surface? A small mat or grippy pad under the feet prevents it. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.
If You Care About Exact Proportions
There's one more consideration that's regularly overlooked: standing feet affect the doll's overall proportions. Adding a small amount of length to the foot, the bolts can somewhat change the way the doll looks in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. Non-standing feet lack the bolts and thus this effect, leaving the feet marginally shorter and more natural-looking.
Extra Cost for Extra Options
At the end of the day, standing feet are worth the extra cost for most buyers, as they open up options for posing, display, storage and the shower that non-standing feet don't. Customers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. For everyone else, standing feet are the better choice, and they're one of the simplest upgrades to justify. More info at this rosslink. Also check out navigate here together with published here and more help for more.
[center]
[/center]
[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
[/center] [center]CLICK FOR BEST SEX DOLL FEET GUIDE NOW[/center]
Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Few customers think about standing feet beforehand, yet the difference, once they need them, is massive. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Comprehend the difference before ordering and you'll have stayed away from an irritating purchase in one of the simplest ways possible.
The Bolts Are the Key
The basic difference couldn't be simpler. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Because non-standing feet don't have these bolts, the doll can only sit or lie down; trying to stand her damages the feet. It all hinges on the bolts, with everything else following from whether they're present or not.
The Photographer's Choice
Standing feet are a must for photography and display. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without noticeable supports. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the principal reason most photographers specify standing feet when ordering.
Showering and Standing Feet
Showering is another case where standing feet are important. A shower with your doll only works if she can stand, as lying her down in one is both impractical and unsafe. Unlike non-standing feet, standing feet don't absorb water thanks to the metal bolts, and they give her stability in a wet environment. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a genuine safety consideration.
No Precaution Is Enough
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. When it gets wet, the foam or filler material inside the ankle of non-standing feet absorbs water. After that, water rusts the metal skeleton inside the leg; you won't see it for weeks or months, and it's fundamentally unfixable once it starts. No matter how diligent you are, a doll with non-standing feet should never be in the shower; water finds its way in anyway of precautions.
Display Rather Than Hide
In some setups, standing feet also make storage easier. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. It's a space-efficient alternative for buyers without room for a hanging setup, and a good one for buyers who'd rather display the doll than keep her hidden. Storing the doll in a way that's apparent and accessible is possible with standing feet, and some purchasers prefer that.
What Standing Feet Cost
The disadvantage of standing feet is that they're slightly more pricey and somewhat heavier. Metal bolts add a small quantity of weight to the doll. Manufacturing is also more involved. The upshot is a price that's ordinarily a few percent higher than a doll with non-standing feet. It's worth knowing about if you're acquiring on an incredibly tight budget, though the difference is small and typically worth the extra cost.
Not a Reason to Avoid Standing Feet
The bolts can show if the feet are bare, which is the other drawback. High-heeled shoes or open-toed footwear on a doll can leave the bolts noticeable in photos, which some buyers find distracting. This is a minor aesthetic issue, and it can be solved by covering the feet with closed shoes or by opting for footwear that hides the bolts, so it's not a reason to stay away from standing feet completely.
Putting the Savings Elsewhere
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Most of her life in a bed or on a sofa means non-standing feet will be perfectly adequate, and you can put the savings into other upgrades like articulated hands or a better wig. This choice is entirely valid for purchasers who know what they want.
Softer, More Flexible Feet
Non-standing feet are somewhat softer and more flexible too, and some buyers find that more comfortable to touch. A subtle difference, not usually enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.
Remember They're Non-Standing
The large risk with non-standing feet is that buyers forget what kind of feet they have and try to stand the doll in any case. This common slip-up causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.
Decide Before You Order
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. Short answer: no, not easily. Expensive, and often not as solid as the original, is the process of adding the bolts later by cutting into the feet and installing new hardware, since they're embedded in the soles during manufacturing. It's better to buy a doll with standing feet in the first place than to try to add them later if you're considering purchasing a doll without standing feet and think you might want them later.
Picking Between Standing and Non-Standing Feet
Customers opting for between standing and non-standing feet can follow some simple functional advice. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet are perfectly acceptable if you only want to use her in bed or on a sofa and you don't care about display. Undecided purchasers are safer with standing feet, which restrict nothing and justify their small extra cost.
Male Dolls Benefit More From Standing Feet
A gender consideration deserves a mention as well. Broadly, standing feet advantage male dolls more than female dolls, because male dolls are heavier and more difficult to store in any other way. A 45kg male doll who can't stand must be stored lying down, putting pressure on the body and requiring more space. Standing feet give male dolls the ability to store upright, which is a real benefit for purchasers who don't have a lot of room.
The Aesthetic Difference
One final note: the aesthetic difference between standing and non-standing feet. On standing feet the bottom is a little harder thanks to the bolts, and that can show when the doll is barefoot. Less aesthetically pleasing, to some buyers, is this, particularly on dolls with delicate features, as the hard soles look slightly industrial. The softer and more natural look of non-standing feet is what some customers prefer. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.
Maintenance: Check the Bolts Periodically
There's also a maintenance angle that's worth considering. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out totally can make the doll collapse. Tighten the bolts with the appropriate tool if they feel loose when you check them every few months by gently twisting. Somewhat lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.
Stability Depends on the Surface
How the doll stands on different surfaces is also influenced by the bolts. On carpet, the bolts grip well and the doll is constant. If the floor is hard, and especially smooth, the bolts can slip and the doll may need additional support to stay upright. Sliding on a hard surface? A small mat or grippy pad under the feet prevents it. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.
If You Care About Exact Proportions
There's one more consideration that's regularly overlooked: standing feet affect the doll's overall proportions. Adding a small amount of length to the foot, the bolts can somewhat change the way the doll looks in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. Non-standing feet lack the bolts and thus this effect, leaving the feet marginally shorter and more natural-looking.
Extra Cost for Extra Options
At the end of the day, standing feet are worth the extra cost for most buyers, as they open up options for posing, display, storage and the shower that non-standing feet don't. Customers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. For everyone else, standing feet are the better choice, and they're one of the simplest upgrades to justify. More info at this rosslink. Also check out navigate here together with published here and more help for more.
[center]
[/center] [center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]

